FAQ
Unfortunately we do not offer adapters for spring and gas ram powered airguns. The recoil forces have a tendency to shear off set screws that have to be tig...
Fri, 23 Apr, 2021 at 9:35 PM
The following models from Kral have 1/2x20 UNF threads Jumbo BigMax PitBull Nemesis Knight
Fri, 23 Apr, 2021 at 9:37 PM
You will need this adapter for the Seneca 909,. https://donnyfl.com/products/sam-yang-m18x1-adapter-a26?_pos=1&_sid=55c97d3c2&_ss=r&variant=124...
Thu, 29 Apr, 2021 at 1:19 PM
We have two adapters that fit the Benjamin P-Rod pistol. This adapter extends the shroud 1.5 inches so there's no need to remove the suppressor to ...
Fri, 7 May, 2021 at 10:37 AM
RAW HM 1000x .25 For the Raw you need the #A90 adapter to add a suppressor. Here is the link below for the adapter needed. https://donnyfl.com/products/ra...
Tue, 16 Nov, 2021 at 11:08 AM
The TX200HC has internal 1/2x20 UNF threads and can accept the #A21 male-to-male adapter so you can use any 1/2x20 UNF threaded moderator. https://donny...
Sun, 9 May, 2021 at 5:38 PM
If your airgun is made before November 2020 the Texan .357 adapter #A34 will fit the barrel, but will need to be bored out to accommodate the .45 clearance....
Wed, 12 May, 2021 at 11:50 AM
Shroudless If you have a bare barrel in the Challenger .30 it has M14x1 threads. Any of our .22-30 suppressors can fit directly on the barrel IF you have a...
Sat, 26 Feb, 2022 at 2:27 PM
You will need the #A11 adapter for your rifle. https://donnyfl.com/products/ataman-m2r-1-2-x-20-unf-adapter?_pos=4&_sid=a39b2e35b&_ss=r I'd...
Wed, 15 Nov, 2023 at 9:11 AM