FAQ
You need this adapter for the Kratos https://donnyfl.com/products/benjamin-akela-1-2-x-20-unf-adapter-a8?_pos=1&_sid=b9aecaef5&_ss=r Some custo...
Sun, 18 Apr, 2021 at 12:17 PM
Use a heat gun to loosen the the adhesive/loctite. you will also need a adapter for it as-well. Here is the link for the Huntsman Regal. https://donnyfl.co...
Wed, 8 Dec, 2021 at 11:52 AM
Here is the link for adapter for the Kral Puncher/NP-03. https://donnyfl.com/products/kral-puncher-breaker-1-2-x-20-unf-adapter?_pos=1&_sid=de5ccb902&a...
Fri, 24 Sep, 2021 at 10:01 AM
For the Vectis, You'll have to cut the plastic muzzle break back until at least .5 inches of the barrel sticks out. The threads are 1/2 x 20, I would pa...
Tue, 1 Dec, 2020 at 11:40 AM
If I recall correctly the Stormrider is threaded M10x1 which is what the Sumatra adapter is: https://donnyfl.com/products/sumatra-2500-1-2-x-20-unf-adapte...
Mon, 6 Sep, 2021 at 11:44 PM
You need this adapter. click on the link below for the adapter. https://donnyfl.com/collections/adapters/products/marauder-pistol-prod-1-2-x-20-unf-adap...
Mon, 21 Sep, 2020 at 2:41 PM
You need this adapter for the Hatsan QE airguns. This works for any caliber .30 and lower. You will need the suppressor to be 1/2x20 thread for it to fit ou...
Tue, 8 Feb, 2022 at 9:49 AM
For the newer Texan LSS you need this adapter. https://donnyfl.com/products/texan-lss-adapter-a65?_pos=2&_sid=cf952efc8&_ss=r I recommend...
Thu, 4 Feb, 2021 at 9:26 AM
We've seen some variance in the outside diameter of the Piledriver barrels over the past few months, so we recommend that you very carefully measure ...
Tue, 19 Dec, 2023 at 9:31 AM
You will need this adapter for the Nova Vista Liberty/Seneca Aspen/Air Venturi Avenger/ Umarex Origin. Make sure to use a suppressor one caliber size up. Wo...
Sat, 3 Oct, 2020 at 1:19 PM