DonnyFL

S410/S500/S510 .22 If your gun does not have a factory suppressor, then you'll need this adapter: https://donnyfl.com/products/air-arms-s510-1-2-x-20-d...

1. You will need to remove the shroud cap. 2. You will need to remove the baffle retainer with a spanner wrench or some really pointy needle nose pliers...

The JTS Brawn has a M18x1 thread for a suppressor. I recommend the Ronin .25/.30 M18x1  #S20A to fit on the Brawn .30. https://donnyfl.com/collections/l...

The Megaladon .58 has M18x1 threads. We can customize a monocore to work with the rifle, but because it is custom work there is no warranty or returns.

We can make a custom endcap for the .58 Megaladon by custom cutting an M18x1 Great Kami endcap to open it up and putting it in a .72 caliber body. We do not...

The units we've seen have a threaded muzzle on the shroud that, while it's 1/2x20 UNF thread, the threads stop short of the shroud and the moderator...

We can exchange that for you as long as it is new and unused.  Please send it to  DonnyFL 1709 Kennedy Point Oviedo FL 32765 Please be sure to include ...

While we appreciate your service, we operate on a MAP pricing model with our dealers, and discounts undercut them.

Keep in mind that the Hammer has a loud firing cycle and a lot of that noise is from the action. This suppressor will lower the muzzle report, but since you...

We've seen several configurations of the S45, so what we can do and what you need will depend on what you have. We have an extender (2") if you ha...